Publicité
ENGLISH
Hazard
Risk of electric
shock caused by live
components
Risk of electric
shock caused by live
parts
10
Where or in which situations
does the hazard occur?
• Under protective panels
• Under the control panel
• Under protection covers
• On the appliance and on
the adjacent metal parts
• On the appliance and
on the adjacent metal
accessories
Countermeasures
• Prevent the appliance
from being powered
accidentally.
• Ensure that there is no
voltage
• Before commissioning the
appliance, check that all
electric connections are
not damaged
• Use a power supply cable
with the specifi cations
indicated in section "Elec-
trical connection" of the
installation manual.
• Before appliance com-
missioning, check that
electrical connections are
securely fi xed
• Before commissioning,
make sure that the
appliance and its metal
accessories are connected
to a system for equipoten-
tial bonding
SAFETY
Safety device
• Protection
panels
• System
switch-dis-
connector
Equipoten-
tial bonding
system
3395270_ut_GB_rev.1
Publicité
