Publicité
- Drilling / Hammer mode
Set the switch to the "Drilling" position
in wood or metal. Set the switch to the "hammer"
position
when drilling in concrete or other hard
materials (bricks, concrete blocks).
b- Maintenance (cleaning, etc.)
Maintenance instructions
Remove the plug from the socket before carrying out
any maintenance.
Check:
If the power cable is damaged, it must be replaced by
the manufacturer or similarly qualified persons in order to
prevent any hazards.
Cleaning:
Ensure that ventilation openings are kept clean when
using the tool in dusty conditions.
Plastic parts can be cleaned with the machine
unplugged, with a damp soft cloth and a little mild soap.
Never immerse the machine or use detergents, alcohol,
petrol, etc. to clean it. In case of problems or for a
thorough cleaning, consult an authorized repairer.
- Keep the machine, instructions for use and, if
necessary, accessories in their original packaging.
This way you will always have at hand all the parts and
information you need.
c- Storage
Store the machine, instructions for use and accessories
in their original packaging. This way you will always have
at hand all the parts and information you need.
Pack the appliance properly or use the original packaging
to avoid transport damages.
Always store the appliance in a dry place.
KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE
ORIGINAL INSTRUCTIONS
when drilling
26
F
G
Publicité
