General; Explanation Of Pictograms - Becker Centronic TimeControl TC4410-II Notice De Montage Et D'utilisation

The transmitter is compatible with all receivers in the Becker Centronic range
of control units.
Products such as roller shutter and sun protection systems, light controls and
remote-controlled sockets can be operated using the ten transmission chan-
nels.
In addition to the ten individual transmission channels, this transmitter also has
three central transmission channels which operate transmission channels 1-5,
6-10 and 1-10.
The transmitter is already set with the current date and time (CET) on delivery
and controls the drives in the morning at the programmed switching time and
in the evening at Astro time (sunset). The switching times can be individually
adjusted for each channel, allowing up to ten different opening and closing
times or switch-on and switch-off times to be carried out automatically.
Using the intermediate position setting, two different positions per channel
can be called up for roller shutter or sun protection applications and two dif-
ferent levels of brightness per channel for a lighting control ("light scene" con-
trol).
This device is exceptionally easy to use.
Please observe these Assembly and Operating Instructions when installing
and setting up the equipment.

Explanation of pictograms

CAUTION
ATTENTION

General

CAUTION indicates a hazardous situation
which, if not avoided, could result in in-
jury.
ATTENTION indicates measures that must
be taken to avoid damage to property.
Denotes user tips and other useful in-
formation.
31 - en