General; Warranty - Becker Centronic TimeControl TC42 Notice De Montage Et D'utilisation

Assembly and Operating Instructions

General

The TC42, which is pre-programmed with factory date and time settings (CET),
operates the roller shutter drive in the morning at the programmed switching
time and in the evening at the set astro time (sunset time).
The TC42 can be operated manually at any time.
This device runs on battery power, meaning it can even be programmed if the
operating element has been removed, as the display does not disappear.
This timer is a user-friendly device.

Warranty

Structural modifications and incorrect installation which are not in accordance
with these and our other instructions can result in serious injuries, e.g. crushing
of limbs. Therefore, structural modifications should only be carried out with our
prior approval and in accordance with our instructions, particularly the informa-
tion contained in these Assembly and Operating Instructions.
Any further processing of the products which does not comply with their intend-
ed use is not permitted.
The end product manufacturer and fitter have to ensure that all the current statu-
tory, official regulations and, in particular, EMC regulations are adhered to dur-
ing utilisation of our products, especially with regard to end product assembly,
installation and customer advice.
26