Safety Information; Intended Use - Becker Centronic TimeControl TC42 Notice De Montage Et D'utilisation

Caution
• Risk of injury through an electric shock.
• Terminal connections to a 230 V network must be carried out by an
authorised electrician.
• Before assembly, disconnect the power lead from the supply.
• The provisions of the local public utilities and stipulations for wet and
damp rooms in accordance with VDE 100 are to be observed when
the system is connected.
• Use in dry rooms only.
• Use unmodified Becker original parts only.
• Keep persons away from the systems guide track.
• Keep away from controls.
• Please comply with national stipulations.
• Dispose of used battery properly.
Replace batteries with an identical type (CR 2032) only.
• If the system is controlled by one or several devices, the system
guide track must be visible during operation.
• Only types of cable with sufficient electric strength can be used for
connecting control cables (protective low voltages).
• The equipment contains small parts that could be swallowed.
The TC42 may be used to drive roller shutters and venetian blind systems only.
This timer may only be used in connection with equipment from other manufac-
turers following consultation with your local retailer.

Safety Information

Intended use

de
en
fr
nl
27