Changing The Battery; Cleaning; Technical Data - Becker Centronic TimeControl TC42 Notice De Montage Et D'utilisation

Assembly and Operating Instructions
Note
The values set remain stored.
Clean the device with a damp cloth only. Do not use a cleansing agent as doing
so may damage the plastic.
Nominal voltage
Switched current
Battery type
System of protection
Protection class
(In accordance with the
assembly specifications)
Running time roller shutters
Running time Venetian blinds
Permissible ambient temperature
Type of installation
46

Changing the battery

Cleaning

Technical data

230 V AC / 50 Hz
5 A / 230-240 V AC bei cos ϕ =1
CR 2032
IP 20
II
2 min
3 min
0 to +55 °C
Concealed Ø 58 mm wall-mounted.
Exposed in appropriate exposed casing
1. Disconnect the operating device.
2. Remove the battery.
3. Insert the new battery properly.
4. Reset the time.