Operating Mode; Menu Button - Becker Centronic TimeControl TC4410-II Notice De Montage Et D'utilisation

Masquer les pouces Voir aussi pour Centronic TimeControl TC4410-II:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

You can make a note of the programmed channel in the la-
belling field underneath the transparent film.
If you keep the channel selection button pressed for 3
seconds, the channel selection sequence will change.
Channel indicator lamps
A radio signal is indicated by the corresponding channel indicator lamp light-
ing up.
The transmission strength and the radio range decrease as battery power de-
clines. If the channel indicator lamp no longer lights up when a button is
pressed, the battery must be replaced.

Operating mode

On the display, you see the time and the current operating mode e.g. HOLI-
DAY.
OK button
The displayed values are saved by pressing the OK button in the menu.
+/- buttons
The following operations are possible via + and -:
• Menu ->Modify value
• Automatic mode ->Retrieve information:
+ button ->Next automatic switching time
- button ->Next automatic switching time
Hold - button and OK button -> Astro time

MENU button

By pressing the MENU button, you access the menu overview or Operating
mode.
The displayed value is not saved.
RESET button
By pressing the RESET button (with a ballpoint pen or similar), the unit is reset
to its factory settings.
Exception: Function, Language selection and City selection menu items.
Transmitter remains programmed in receiver.
37 - en

Hide quick links:

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Centronic timecontrolTc445-ii

Table des Matières