Industrial Ethernet; Fieldbus Gateway - Burkert Ae3360 Démarrage Rapide

Type 3360, 3361
IndustrialEthernet
The valve position is to be detected on the mechanical position
indicator.
Mechanical position
indicator
Valve closed
Fig. 33: Mechanical position indicator AG2
→
Once the desired valve position is achieved, remove the Allen
key. The mechanical manual override mechanism will disengage
automatically.
Close the blind cover or display module:
WARNING!
For devices with display module
Before mounting the display, check whether the cable is correctly
connected to the HMI interface.
→
Mount blind cover or display module and turn clockwise until the
2 marks (one vertical line on the blind cover and on the actuator)
are vertically aligned.
Valve open
13

INDUSTRIAL ETHERNET

13.1 Fieldbus gateway

Fieldbus gateway for integration into an Ethernet network.
Supported fieldbus protocols: Ethernet/IP, PROFINET, Modbus TCP.
display
module
Fieldbus
gateway
Fig. 34: Fieldbus gateway with display module
For electrical connection of the fieldbus gateway: see
chapter "8.2" on page 29.
Further information on Industrial Ethernet. See operating ins-
tructions on the website country.burkert.com.
English
Fieldbus connector
M12
(2-port Ethernet
switch)
55