Manual Override Of Valve; Electrical Override Of Valve - Burkert Ae3360 Démarrage Rapide

Type 3360, 3361
Manualoverrideofvalve
12

MANUAL OVERRIDE OF VALVE

The actuation of the control valve can be manually overridden by
electrical or mechanical means.
Electrical manual override is usually used to manually open and close
the valve.
The mechanical manual override is to open and close the valve in the
event of a power failure or when there is no power. The valve must only
be manually overridden while in a de-energised state.

12.1 Electrical override of valve

Dependent on the device variant, the valve can be manually overridden
electrically from the display or using two buttons located on the LED
& storage module under the blind cover.
12.1.1 Electrical override of valve on devices
with a display module
The valve is operated on the display in the MANUAL/AUTO layout and
in the MANUAL operating state.
The MANUAL/AUTO layout is pre-defined in factory settings
for the home screen (factory designation: View 1...).
To access the home screen, hold down the
Changing the layout: See operating instructions on the
website https://country.burkert.com.
Switch to MANUAL operating state:
→
To switch to MANUAL operating state, briefly press the
button.
The MANUAL symbol
The two arrow symbols labelled "open" and "close" are displayed.
They open or close the valve:
→
To open the valve
→
To close the valve,
→
To switch to AUTOMATIC operating state, briefly press the
menu button.
Back key.
Fig. 29: Electrical manual override on the display
English
appears in the information bar at the top.
, press the upper navigation key.
press the bottom navigation key.
Symbol for MANUAL
View 1 of x
operating state
POS 70%
Display in MANUAL/
AUTO layout and in
AUTOMATIC operating
open state
Auto
closed
Back button
Menu button
Navigation keys
menu
51