Hozelock Select Plus 2224 Mode D'emploi page 8

All manuals and user guides at all-guides.com
8
CONNECTING THE TIMER TO THE TAP
Use the supplied adaptors if required. Hand tighten firmly
CONNECTING THE TIMER TO THE TAP
to ensure there are no leaks. Do not use a wrench or other
Use the supplied adaptors if required. Hand tighten firmly to ensure
tool to tighten the nuts as this can permanently damage the
there are no leaks. Do not use a wrench or other tool to tighten the
plastic components.
nuts as this can permanently damage the plastic components.
This product is not designed to be used in
sub-zero (frost) temperatures. During winter
This product is not designed to be used in sub-zero (frost)
months drain any remaining water out of
temperatures. During winter months drain any remaining
your timer and bring it indoors until the next
water out of your timer and bring it indoors until the next
watering season. Remove the batteries from
watering season. Remove the batteries from the front
the front panel if you do not intend to use it for
panel if you do not intend to use it for long periods.
long periods.
PROBLEM SOLUTION
Valve opens and closes when Your Select Plus Timer has
Valve opens and closes when Your Select Plus Timer has
batteries are first inserted detected low battery power.
batteries are first inserted but detected low battery power.
but then fails to operate Replace with new batteries.
then fails to operate when
Replace with new batteries.
when watering manually or
watering manually or
automatically.
automatically.
Your Select Timer has detected
The screen displays "BATT"
The screen displays "BATT" Your Select Timer has detected
low battery power. Replace with
low battery power. Replace with
new batteries.
new batteries.
Valve operates but no water Check your tap is turned on.
Valve operates but no water Check your tap is turned on.
flows.
flows.
Valve works on manual but Check that the P1, P2 or P3
Valve works on manual but no Check that the P1, P2 or P3
no auto Run (automatic) programs are turned on.
Auto Run (automatic) watering. programs are turned on.
watering.
When I press the water now
Make sure the front panel is fully
When I press the water now Make sure the front panel is fully
button the valve does not
inserted into the valve body.
button the valve does not inserted into the valve body.
operate.
operate.
TECHNICAL DATA
TECHNICAL DATA
Operating Pressure 0.1 – 10Ba r
Operating Pressure
Operating 1 - 55°C
Operating Temperature
Temperature
Maximum water 30°C
Maximum water temperature
temperature
0.1 – 10Bar
1 – 55°C
30°C