Publicité
Les langues disponibles
Les langues disponibles
Power on Robot
5
Turn on the power switch under the robot cover
the robot in front of the Station that is connected to power supply�
("I" = ON, " "=
OFF), and place
Connect Robot to App
6
Network Interface Information
Name
Enable Bluetooth to connect the robot to the network during
Bluetooth
the network setup process�
Facilitate data transfer between the app and the robot, enabling
WI-FI*
control of the robot through the app�
ECOVACS products offer smart functions such as network
ECOVACS
setup, mapping, and cleaning mode selection (specific to each
HOME App
product)� To utilize these features, users need to download and
use the official ECOVACS Home App�
*Note:
The Deebot series robotic vacuums are designed for domestic cleaning scenarios� A
home Wi-Fi network is required for operation, and anti-DDOS protection can be configured by
users through route settings�
Wi-Fi Network Requirements:
• You are using a 2�4GHz or 2�4/5 GHz mixed network�
• Your router supports 802�11b/g/n and IPv4 protocol�
• Do not use a VPN (Virtual Private Network) or Proxy Server�
• Do not use a hidden network�
• WPA and WPA2 using TKIP, PSK, AES/CCMP encryption�
• WEP EAP (Enterprise Authentication Protocol) is not supported�
• Use Wi-Fi channels 1-11 in North America and channels 1-13 outside North
America (refer to local regulatory agency)�
• If you are using a network extender/repeater, the network name (SSID) and
password are the same as that of your primary network�
• Please enable the WPA2 on your router�
Wi-Fi Indicator Light
Slow Flashing White
Quick Flashing White
Solid White
Description
Disconnected from Wi-Fi
Connecting
Connected to Wi-Fi
15 EN
Publicité
