Clamping Systems; Haver Twinnut - HAVER & BOECKER HAVER UWL 400 Notice D'utilisation

3.2 Clamping systems (according to delivery)
3.2.1 Classic (Standard)
Elevation adjustment:
By turning the nut it moves up and down the guide rod.
Tensioning:
The sieve cover has to be installed and both nuts must be screwed down simultaneously.

3.2.2 HAVER TwinNut

Elevation adjustment:
Pull apart the two parts of the nut and slip it on the guide rod up to the sieve cover. Reclose it.
Tensioning:
Tighten the two HAVER TwinNuts simultaneously.
© Copyright 2009 by HAVER & BOECKER
1. Tension nut with handlebars
2. Guide rod
3. Sieve cover
Nut HAVER TwinNut
1.
Guide rod
2.
3. Sieve cover
Page 18/40