Application References - HAVER & BOECKER HAVER UWL 400 Notice D'utilisation

6.

Application references

The machine has been constructed according to the actual technical standards and the
recognized safety specifications. Although, there might be dangers for the user or third
persons or impairments of the machine and other goods.
Only use the machine in perfect technical constitution. Follow the operating instructions conscious of
safety and danger. Repair defects at once by authorized and qualified persons!
The machine has exclusively been developed for grain sieving to determine particle distribution. Any other
or further application is not as agreed upon. The manufacturer/supplier will assume no responsibility for
damages as a result of improper use. The risk is on the user's side.
7. Assembly
7.1 UWL 400 T and N
© Copyright 2009 by HAVER & BOECKER
Put the machine on the floor and remove the transport eyelet (1).
Do not use a rubber support!
Screw the guide rods (1) into the threaded holes of the vibration plate (2)
Page 21/40