HAVER & BOECKER HAVER UWL 400 Notice D'utilisation page 22

. UWL 400 T
Put on the test sieve set (1) and fill the sieving material in the
upper test sieve
Please notice item 9, Test sieving according to ISO 2591-1!
Put on the cover (2) and fix it simultaneously with the two
nuts (3).
The machine should not be used without test
sieves!
UWL 400 N
Put on the sieve pan with outlet (4), the test sieve set (1) and
fill the sieving material in the upper test sieve. Put on the
cover (2) fix it simultaneously with the two nuts (3).
Slip the PVC-water hose (5) over the wide spreading spray
diffuser and connect the discharge hose to the outlet of the
sieve pan.
Please notice item 9, test sieving according to ISO 2591-1!
The machine should not be used without test sieves!
Fix the holding device and the separate control gear to the
wall.
Connect the mains plug, pay attention to the power supply!
© Copyright 2009 by HAVER & BOECKER Page 22/40