Surface Elements; Temperature Limiter - GE Cooktop Radiant Manuel D'utilisation Et Instructions D'installation

Dual Surface Element
The left front surface element has 2 cooking
sizes to select from so you can match the
size of the element to the size of the
cookware you are using.
To use the large surface element, turn the
SELECTOR knob to . Push down and turn
the control knob to the desired setting. The
element will heat the entire area contained
by the larger circle.
Surface Elements Cycle On and Off
Surface elements will cycle on and off
to maintain the temperature you have
selected.
All radiant surface elements have a
temperature limiter that protects the glass
cooktop from getting too hot.
(on some models)
To use the small surface element, turn the
SELECTOR knob to
control knob to the desired setting. The
element will only heat the area inside the
smaller circle.
The temperature limiter may cycle the
elements off while cooking if:
s
The pan boils dry.
s
The pan bottom is not flat.
s
The pan is off-center.
s
There is no pan on the element.
ge.com
. Push in and turn the
7