Glass Surface-Potential For Permanent Damage - GE Cooktop Radiant Manuel D'utilisation Et Instructions D'installation

Glass surface—potential for permanent damage
Our testing shows that if
you are cooking high sugar
mixtures such as jelly or
fudge and have a spillover,
it can cause permanent
damage to the glass
surface unless the spillover
is immediately removed.
Metal Marks and Scratches
Be careful not to slide pots and pans
across your cooktop. It will leave
metal markings on the cooktop
surface.
These marks are removable using
the CERAMA BRYTE ® Ceramic Cooktop
Cleaner with the CERAMA BRYTE
Cleaning Pad for Ceramic Cooktops.
Damage from Sugary Spills and Melted Plastic
Turn off all surface elements. Remove
hot pans.
Wearing an oven mitt:
a. Use a single-edge razor blade
scraper (CERAMA BRYTE
Cooktop Scraper) to move the spill
to a cool area on the cooktop.
b. Remove the spill with paper towels.
To Order Parts
To order CERAMA BRYTE ® Ceramic Cooktop
Cleaner and the cooktop scraper, please
call our toll-free number:
National Parts Center
CERAMA BRYTE ® Ceramic
Cooktop Cleaner . . . . . . . . . . .# WX10X300
CERAMA BRYTE Ceramic
®
Cooktop Scraper . . . . . . . . . . .# WX10X0302
Kit . . . . . . . . . . . . . . . . . . . . . . . . . .# WB64X5027
(Kit includes cream and cooktop scraper)
CERAMA BRYTE ® Cleaning Pads for
Ceramic Cooktops . . . . . . . . .# WX10X350
If pots with a thin overlay of
aluminum or copper are allowed
to boil dry, the overlay may leave
black discoloration on the cooktop.
This should be removed
immediately before heating
® again or the discoloration may
be permanent.
WARNING: Carefully check the bottom of
pans for roughness that would scratch
the cooktop.
.
Any remaining spillover should be left
until the surface of the cooktop has
cooled.
Don't use the surface elements again
® Ceramic until all of the residue has been
completely removed.
NOTE: If pitting or indentation in the glass
surface has already occurred, the cooktop
glass will have to be replaced. In this case,
service will be necessary.
800.626.2002
ge.com
11