Before Starting The Engine - Pro-Point 8953176 Mode D'emploi

8953176
2. Replace the oil cap for shipping with the vented/breather oil cap.
OPERATIONS
NOTICE! The engine is not shipped with oil. Before starting
the engine, add oil according to the instructions in this
manual. Starting the engine without oil will damage the
engine beyond repair.
Check the engine's condition before operating to maximize the user's
safety and the service life of the engine. Ensure that the engine is level
and the switch is in the OFF position before beginning the pre-
operation checks.

BEFORE STARTING THE ENGINE

WARNING! Do not start or run engine in an enclosed area,
even if the doors or windows are open. Engine exhaust
contains carbon monoxide (see Carbon Monoxide
Precautions).
1. Make sure spark plug, muffler, fuel cap and air cleaner are in place
and secured.
2. Ensure the spark plug lead is securely connected to the spark
plug, otherwise unintentional sparking can result, causing a fire or
electric shock.
3. Check the air filter. A dirty air filter will reduce engine performance.
4. Check that all protective covers and guards are in place.
5. Check that all nuts, bolts and screws are tight.
6. Check the fuel level.
7. Check the engine oil level. Running the engine without enough oil
can damage the engine.
8. Look around and underneath the engine for signs of oil or gasoline
leaks. Do not start the engine until any spilled fuel has evaporated.
9. Remove any excessive dirt or debris, especially around the muffler
and recoil starter.
10. Look for signs of damage.
Assistance available at www.princessauto.com or 1-800-665-8685
4,5000W GASOLINE INVERTER GENERATOR V1.0
Page 8