Care & Maintenance - Pro-Point 8953176 Mode D'emploi

V1.0
• Many electric devices draw more power in the first couple of
seconds when starting, than is required during normal
operation.
6. Continue to connect additional devices and wait for the engine to
stabilize each time.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient,
easier to control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace
damaged or worn components.. Only use identical replacement
parts when servicing.
3. Only use accessories intended for use with this tool. Follow
instructions for changing accessories.
4. Keep the tool handles or gripping surfaces clean and dry.
5. Maintain the tool's labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd.
for replacements.
WARNING! Only qualified service personnel should repair
the tool. An improperly repaired tool may present a hazard
to the user and/or others.
TESTING AND RESETTING THE GFCI
OUTLET
Test the GFCI outlet with a GFCI tester. Read the GFCI tester
instructions on how to interpret the light code.
If you don't have a GFCI tester, plug a device, like a lamp or radio, into
a working outlet. Turn the device on to confirm it works. Switch it off
and unplug it. Use this to test the outlet.
1. Start the generator.
2. Plug the GFCI tester into the GFCI outlet and read the codes.
• If using a device, plug it into the GFCI outlet and switch it on.
Page 13
4,5000W GASOLINE INVERTER GENERATOR
Assistance available at www.princessauto.com or 1-800-665-8685
8953176