EINHELL TP-CO 18/76-C li BL Instructions D'origine page 14

user to numerous risks such as inhaling dust or
being hit by fl ying debris!
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
4. Technical data
Motor power supply: ............................... 18 V DC
Rated speed: ....................................20,000 min
Max. wheel diameter: ............................... 76 mm
Mounting spindle thread: ............................... M5
Weight: .....................................................0.74 kg
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L sound pressure level ........................ 90 dB(A)
pA
K uncertainty ............................................ 3 dB
pA
L sound power level ......................... 101 dB(A)
WA
K uncertainty ............................................. 3 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 60745.
Handle
Vibration emission value a
K uncertainty = 1.5 m/s
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Anl_TP-CO_18-76-C_Li_BL_SPK13.indb 14 Anl_TP-CO_18-76-C_Li_BL_SPK13.indb 14
-1
= 5.0 m/s
2
h
2
- 14 -
GB
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
5. Before starting the equipment
Warning!
Always remove the battery before making ad-
justments to the tool.
5.1 Adjusting the guard (Fig. 4)
•
The guard (5) is equipped with an automatic
latching function so that it can be adjusted wi-
thout you having to release a lever or similar.
•
To protect your hands, adjust the guard (5) so
that the ground material is directed away from
your body.
•
Do this by simply turning the guard (5) into
the required position.
•
No additional fastening of the guard (5) is
needed.
•
The guard (5) cannot be removed from the
tool.
30.10.2024 12:45:44 30.10.2024 12:45:44