VANTRUE Element 1 Lite Manuel D'utilisation page 9

3. Installation
3.1 Installing a Memory Card (Recommend Vantrue U3 high-speed microSD
card).
Please use a genuine Micro SD memory card from 32GB to 512GB with a
speed rating of U3 higher. We recommend using Vantrue Micro SD Card
(not included in the box). Please insert the SD card when dash cam is off.
Memory card installation: There is an icon indicating the insertion direction
of the memory card. Please push the memory card into the card slot
according to the direction indicated by the icon, until a "click" sound is
heard in the card slot, indicating that the memory card is inserted properly.
To remove the card, power off the camera first, then push the card into
the slot until it clicks again. (The following is a line drawing of a memory
card inserted into Element 1 Lite).
Before using this card, please follow the steps below to format it properly:
If the camera is recording, please press the
the recording, then press the
enter the "System", select the format card
memory card until it prompts "Formatted successfully".
recording icon to pause
menu icon to enter the menu, then
, and confirm to format the
- 5 -