Télécharger Imprimer la page

VANTRUE Element 1 Lite Manuel D'utilisation page 23

Publicité

Les langues disponibles

Les langues disponibles

reaches the upper limit, new event video file will automatically
overwrite old event video file. It is recommended to periodically check
and save your event video files to avoid loss.
3.
Lock recording will not trigger in either of the following situations: Loop
recording is off or time-lapse recording is on.
4.2.3 Parking Mode(When the parking mode is turned on, the time-lapse
video function will not work. These two functions cannot run at the same
time)
Parking Mode operates as a sentry function under different situations. You
can switch to different parking monitoring modes according to different
parking situations.
After parking mode is turned on, there are two ways to record. You can
wait for 5 minutes to restart automatically, or long press the
begin manually.
Note:
1.
Please use a hardwiring kit or other stable and continuous power supply
to power the camera to ensure that the camera works properly in
parking mode.
2.
The E1 Lite operating environment temperature is 14°F to 140°F (-20°C to
60°C). We recommend selecting Collision Detection within this tempera-
ture range, as it will automatically turn off once the temperature
exceeds the normal operating temperature range. If the temperature
outside is high, turn off the camera when parking.
3.
Time-lapse video recording and parking mode (including collision
detection, motion detection, low bitrate recording, and low framerate
mode) can only be enabled one at a time. When one is enabled, the
other will be automatically disabled.
4.
All videos in parking mode(Collison Detection, Motion Detection, Low
Bitrate Recording, Low Framerate mode) will be saved in the normal
- 19 -
button to

Publicité

loading