VANTRUE Element 1 Lite Manuel D'utilisation page 26

Note: Motion detection can only be engaged when the camera is turned
on. Once the camera is turned off, motion detection will not work.
Low Bitrate Recording
When the low bitrate mode is on, the icon or icon will be displayed
in the screen depending on your setting.
If no movement is detected after 5 minutes of recording, there will be a
icon that appears in the center of the screen. The resolution of all current
video will be automatically switched to 1080P 15FPS or 720P 15FPS for
recording, and the recording duration is determined according to the
currently set loop recording duration. When the camera vibrates or is
moved, it will automatically exit, wait 5 minutes, and enter again.
1920x1080P(HDR) 30FPS
120
00:00:37
22-10-2022 14:09:07 MP/H
Note: Low Bitrate recording can only be engaged when the camera is
turned on. Once the camera is turned off, Low Bitrate recording will not
work.
Low Framerate mode
When the low framerate mode is selected, the camera will record
according to your selection among 1FPS/5FPS/10FPS/15FPS. For example,
if you select 1FPS and the current video resolution framerate is 30FPS, the
recorder will generate a 30FPS video per second. Low framerate mode
can greatly preserve the integrity of the video and save space on the
memory card.
- 22 -