Dreame R10 Mode D'emploi page 22

with a dry cloth or paper towel. Thoroughly
EN
dry before use.
Fig. F-15
3. When it is dirty, rinse the brush roller
with clean water until it is clean.
Fig. F-16
4. Stand the brush roller upright for at least
24 hours until it is fully dry.
Fig. F-17
Cleaning the Motorized Mini-
Brush
1. Use a coin as illustrated to rotate the lock
counterclockwise until you hear a click.
Fig. F-18
2. After unlocking the motorized mini-brush,
remove the brush roller, then rinse and
clean it.
Fig. F-19
3. Stand the brush roller upright in a well-
ventilated area for at least 24 hours until it is
fully dry.
Fig. F-20
4. Once the brush roller is dry, reinstall it by
following the disassembly steps in reverse.
Fig. F-21
Battery Pack
The vacuum contains a removable
rechargeable lithium-ion battery pack which
has a limited number of recharge cycles.
After extended use, the battery pack may
no longer hold a charge. If this happens, it
means the battery pack has reached the end
of its life cycle and needs to be replaced.
1. Press down the battery pack release
button and slide the battery pack to the
right, as illustrated, to remove it.
2. Install the new battery pack.
Fig. F-22
6