Dreame R10 Mode D'emploi page 20

Use the trigger switch lock to free your
EN
fingers and avoid finger fatigue caused by
holding the switch.
Fig. E-2
Note:
• In this mode, the lock indicator will
illuminate steadily.
• Click the trigger switch lock again to quit
the Continuous Cleaning Mode.
Using Different Accessories
Multi-Surface Brush
- When using on baby play mats, carpets
or for vacuuming coffee beans, pop corn
and other pellets, turn on the switch on the
brush.
- When vacuuming on tiles, wooden floors
or other hard surfaces, turn off the switch.
Fig. E-3
Note:
• The multi-surface brush can be attached
directly to the vacuum.
• When the appliance starts, the lights in
front of the brush roller will automatically
turn on, which is convenient for use.
Motorized Mini-Brush
For vacuuming dirt, pet hair, and other
stubborn debris from sofas, bedding, and
other fabric surfaces.
Fig. E-4
Note: It is not recommended to vacuum on
fragile surfaces, such as silk.
Wide Combination Tool
For vacuuming curtains, keyboards, ceilings,
sofas, vehicle interiors, coffee tables, etc.
Fig.E-5
Flexible Combination Tool
Bendable and retractable brush-nozzle,
more flexible to vacuum in narrow gaps.
Fig.E-6
Wall Mount
The vacuum cleaner can be placed on the
4
wall mount when it is not in use.
Note:
• Do not put the vacuum cleaner alone on
the wall mount.
• Place it on the wall mount after
connecting it with the extension rod and
the multi-surface brush.
Fig. E-7
Note:
• If any rotating part becomes stuck, the
vacuum may shut off automatically.
Remove any trapped foreign objects, then
resume use.
• When the motor becomes overheated,
the vacuum will automatically shut off.
Wait until the battery temperature returns
to normal, then resume use.
Care & Maintenance
Tips:
1. Always use genuine parts to keep your
warranty from being void.
2. If the filter or nozzle becomes clogged,
the vacuum will stop working shortly
after being turned on. Clear the tube to
restore functionality.
3. If the vacuum is not used for an extended
period, fully charge it, unplug its charger,
and store it in a cool, low-humidity
environment away from direct sunlight.
To avoid over-discharging the battery,
recharge the vacuum at least once every
three months.
Cleaning the Vacuum
Wipe the vacuum with a soft dry cloth.
Cleaning the Dust Cup, Pre-
Filter, and Cyclone Assembly
The vacuum's cleaning ability will be
reduced if the dust cup is filled to the
"MAX" mark. To regain performance, empty
the dust cup in a timely manner. Before