Before First Use; Low-Acrylamide Cooking - SilverCrest SKF 2800 B2 Mode D'emploi

INFORMATION ON USING BATTERIES
Never open batteries and never solder or weld batteries.
►
There is a risk of explosion and injury!
Check the condition of the batteries at regular intervals.
►
Leaking batteries can cause damage to the appliance.
If you do not intend to use the appliance for an extended
►
period, remove the batteries.
If the batteries have leaked, use protective gloves. Clean the
►
battery compartment and the battery contacts with a dry cloth.
Keep batteries out of the reach of children. Children might
►
put batteries into their mouth and swallow them. If a battery is
swallowed, medical assistance must be sought immediately.
Before first use
1) Before you use the deep fat fryer for the first time please clean all individual com-
ponents thoroughly and carefully dry them (see Chapter "Cleaning and Care").
2) Pull the timer
3) Remove the insulation strip from the battery compartment.
4) Push the timer
NOTE
► If you are unable to pull the insulating strip out of the battery compartment,
open the battery compartment, remove the battery and then remove the
insulation strip.
► Insert the battery into the battery compartment according to the polarity
marked on the battery compartment cover and then replace the battery
compartment cover.

Low-acrylamide cooking

Acrylamide is a possibly carcinogenic substance formed from a reaction with
amino acids when frying foodstuffs with a high starch content. The formation of
acrylamide increases rapidly at temperatures of more than 175°C.
■ 52 │
GB
out of the deep fat fryer.
back into the recess in the deep fat fryer.
SKF 2800 B2