Kohler K-R77748 Guide D'installation Et D'entretien page 6

Ø 3"
(76 mm) Min
Supply Hose
2. Connect the Hoses
CAUTION: Risk of restricted water flow and product damage.
Supply hoses must not be taut, kinked, or twisted during
installation. If the supply hoses must be coiled, maintain an inside
diameter of 3" (76 mm).
Connect and tighten the supply hoses to the supply stops.
Place a bucket under the copper outlet tube.
Turn on the water supplies.
Flush hot and cold water into a bucket for 1 minute to remove
any debris.
1320925-2-C
Copper
Outlet Tube
6 Kohler Co.