Ryobi ONE+ PBLHG01 Manuel D'utilisation page 8

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
V
hrs
n o
.../min
PRODUCT SPECIFICATIONS
Motor ......................................................................18 V DC
Blade Length .............................................................. 24 in.
KNOW YOUR HEDGE TRIMMER
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
ANTI-JAM TECHNOLOGY
If the blades become jammed, the motor will automatically
reverse slightly to unjam the blades before stopping. Release
the switch trigger and depress again to resume operation.
DEBRIS DEFLECTOR
When installed, the debris deflector makes removal of cut
debris easier.
NAME
Electric Shock
Recycle Symbol
Volts
Hours
Direct Current
No Load Speed
Per Minute
FEATURES
SYMBOLS
Failure to use in dry conditions and to observe safe practices
can result in electric shock.
This product uses lithium-ion (Li-ion) batteries. Local, state,
or federal laws may prohibit disposal of batteries in ordinary
trash. Consult your local waste authority for information
regarding available recycling and/or disposal options.
Voltage
Time
Type or a characteristic of current
Rotational speed, at no load
Revolutions, strokes, surface speed, orbits etc., per minute
Cutting Capacity ........................................................ 3/4 in.
Cutting Speed ............................................. 3,200 cuts/min
GUARD
The guard helps to deflect chips or other debris away from
the operator's hands.
LOCK-OUT BUTTON
The lock-out button prevents unintentional starting of the
hedge trimmer.
SCABBARD
The scabbard keeps the operator from coming in contact
with the sharp blades when the tool is not in use. It also helps
keep the blades from being nicked or damaged when the
tool is in storage. Remove the battery pack prior to installing
or removing the scabbard.
6 — English
EXPLANATION