Domo DO938K Mode D'emploi page 69

Reverse Door
5. Povoľte závesný kolík pántu, vyberte otočte a kolík opäť dotiahnite.
5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.
oor
move the bottom hinge pin, turn the bracket over and replace it.
oor
oor
move the bottom hinge pin, turn the bracket over and replace it.
Unscrew
move the bottom hinge pin, turn the bracket over and replace it.
Unscrew
6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable
6. Všetko (skrutka a záves pántu) namontujte na opačnú spodnú stranu prístroja. Následne dajte späť a
feet.
nastavte nožičku tak, aby sa prístroj nekýval.
Unscrew
fitting the bottom hinge pin. Replace both adjustable
fitting the bottom hinge pin. Replace both adjustable
fitting the bottom hinge pin. Replace both adjustable
7. Place the door back on. Ensure the door is aligned horizontally and
vertically, so that the seals are closed on all sides before finally
tightening the top hinge.
7. Na spodnej pánt nasaďte späť dvere. Dvere musia byť vodorovne, aby ich tesnenie priliehalo po
ack on. Ensure the door is aligned horizontally and
celom obvode. Ak dvere dobre tesní, môžete usadiť aj horný pánt a priskrutkovať ho.
t the seals are closed on all sides before finally
p hinge.
ack on. Ensure the door is aligned horizontally and
t the seals are closed on all sides before finally
p hinge.
ack on. Ensure the door is aligned horizontally and
t the seals are closed on all sides before finally
8. Put the top cover and fix it with 2 screws on the back.
p hinge.
r and fix it with 2 screws on the back.
8. Pant prekryte krytom a opäť ho priskrutkujte.
r and fix it with 2 screws on the back.
9. Fix the thermostat knob.
r and fix it with 2 screws on the back.
at knob.
at knob.
at knob.
www.domo-elektro.be
Unscrew
8
8
8
Screw
Screw
Screw
screw
screw
screw
8
Screw
screw
69
DO938K