Domo DO938K Mode D'emploi page 40

oor
move the bottom hinge pin, turn the bracket over and replace it.
Unscrew
move the bottom hinge pin, turn the bracket over and replace it.
6. Attach the screws and hinge bracket to the opposite side of the bottom. Put the adjustable feet
Unscrew
back into place.
Unscrew
fitting the bottom hinge pin. Replace both adjustable
fitting the bottom hinge pin. Replace both adjustable
fitting the bottom hinge pin. Replace both adjustable
7. Carefully set the door back into place. Ensure the door is aligned horizontally and vertically so that
ack on. Ensure the door is aligned horizontally and
the seals are closed on all sides before finally tightening the top hinge. Insert the hinge back and
t the seals are closed on all sides before finally
p hinge.
screw it to the top of the appliance.
ack on. Ensure the door is aligned horizontally and
t the seals are closed on all sides before finally
p hinge.
ack on. Ensure the door is aligned horizontally and
t the seals are closed on all sides before finally
p hinge.
r and fix it with 2 screws on the back.
8. Put the top cover back and fix it in place with the screws.
r and fix it with 2 screws on the back.
r and fix it with 2 screws on the back.
at knob.
at knob.
at knob.
TROUBLE SHOOTING
Frequently, a problem is minor and a service call may not be necessary, use this trouble shooting guide for
a possible solution.
Does not work
· Check connection of power cord to power source.
· Plug in unit
· Use proper voltage.
40
DO938K
8
8
8
Screw
Screw
Screw
screw
screw
screw