Before The First Use - Domo DO938K Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
·
All repairs should be carried out by the manufacturer or its aftersales service.
·
Never immerse the appliance, the cord or the plug in water or any other liquid.
·
Keep the cord away from sharp edges and hot parts or other heat sources.
·
Keep the ventilation openings free of obstructions.
·
Do not use any other electrical appliance inside the fridge, unless they are approved for this purpose
by the manufacturer.
·
Do not keep any explosive substances inside the appliance, like for instance aerosol cans with a
flammable propellant.
·
Make sure that the refrigerant circuit does not get damaged, for instance during transportation or
installation.
·
Make sure that the plug does not get squashed or damaged by the back of the appliance. A squashed
or damaged power plug may overheat and cause fire.
·
Make sure that you have access to the plug of the appliance.
·
Do not pull the cord.
·
If the socket is loose, do not plug in the appliance. (risk of electric shock or fire)
·
Avoid long exposure to direct sunlight.
PARTS
1.
Temperature control knob
2.
Shelves
3.
Vegetable container
4.
Levelling feet
5.
Door shelves

BEFORE THE FIRST USE

·
Remove the exterior and interior packing, wipe the outside thoroughly with a soft dry cloth and the
inside with a wet, lukewarm cloth.
·
Select a place with a strong, level floor.
·
Allow 13 cm of space between the back of the refrigerator and any adjacent wall.
·
Avoid direct sunlight and heat. Direct sunlight may affect the acrylic coating. Heat sources nearby will
cause higher electricity consumption.
www.domo-elektro.be
2
3
4
1
5
35
DO938K

Publicité

Table des Matières
loading

Table des Matières