Domo DO938K Mode D'emploi page 9

oor
lips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
s unplugged and empty.
Het is aanbevolen om een kruiskopschroevendraaier en een moersleutel te gebruiken (beide niet
off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
oor
meegeleverd).
slip during the door reversing process.
d must be saved to do the reinstallation of the door.
it flat as this may damage the coolant system.
lips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
2 people handle the unit during assembly.
oor
1. Verwijder de schroeven achteraan het bovendeksel.
s unplugged and empty.
off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
oor
slip during the door reversing process.
lips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
d must be saved to do the reinstallation of the door.
ews at rear side of top cover.
s unplugged and empty.
it flat as this may damage the coolant system.
lips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
2 people handle the unit during assembly.
slip during the door reversing process.
s unplugged and empty.
d must be saved to do the reinstallation of the door.
off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
it flat as this may damage the coolant system.
slip during the door reversing process.
2 people handle the unit during assembly.
d must be saved to do the reinstallation of the door.
ews at rear side of top cover.
it flat as this may damage the coolant system.
2 people handle the unit during assembly.
ews at rear side of top cover.
ews at rear side of top cover.
er and thermostat knob, then place it aside.
2. Haal het bovendeksel van de koelkast af.
er and thermostat knob, then place it aside.
er and thermostat knob, then place it aside.
er and thermostat knob, then place it aside.
ge and then remove door and place it on a soft pad to
ge and then remove door and place it on a soft pad to
3. Verwijder de schroeven en vervolgens het bovenscharnier die de deur op zijn plaats houdt. Til de
deur op en plaats deze op een zacht oppervlak om krassen te vermijden.
ge and then remove door and place it on a soft pad to
ge and then remove door and place it on a soft pad to
hinge. Then remove the adjustable feet from both
hinge. Then remove the adjustable feet from both
hinge. Then remove the adjustable feet from both
4. Verwijder de onderste schroef, scharnierbeugel en de stelvoetjes onderaan het apparaat.
hinge. Then remove the adjustable feet from both
www.domo-elektro.be
7
7
7
7
unscrew
unscrew
unscrew
unscrew
9
DO938K