Power Failure; Door Conversion - Domo DO938K Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
·
Clean the refrigerator thoroughly, including defrost pan.
·
Leave door open to avoid possible formations of condensate, mold or odors.

POWER FAILURE

Most power failures are corrected within an hour or two and will not affect your refrigerator temperatures.
However, you should minimize the number of door openings while the power is off. During power failures
of longer duration, take steps to protect your food by blacking dry ice on top of packages.
Move the appliance
Disconnected the power plug, Remove or securely fasten down all loose items inside the refrigerator, To
avoid damaging the leveling legs, turn them all the way into the base.
SOME IMPORTANT RULES FOR THE CORRECT USE OF THE REFRIGERATOR
·
Never place hot foods in the refrigerator.
·
Beverages should be stored in sealed containers.
·
Foods to be stored for a long time should be wrapped in cellophance or polyethylence, or kept in glass
containers.
·
Never place spoiled foods in the cabinet.
·
Don't overload the cabinet.
·
Don't open the door unless necessary.
·
Caution: please keep the products away from the fire or similar glowing substance before you dispose
the refrigerator.
·
Caution : Not for outer camping use (ex. Tent)
·
Caution: For indoor use only.
·
Caution: The appliance can not be used in public transportation.

DOOR CONVERSION

oor
If you need to hinge your door on the opposite side it is recommended that you call your local authorised
service agent to make this conversion or ask a technician.
lips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
s unplugged and empty.
Before you reverse the door, you should ensure the appliance is unplugged and empty. It is recommended
off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
to use a crosshead screwdriver and a spanner (both not supplied).
slip during the door reversing process.
d must be saved to do the reinstallation of the door.
it flat as this may damage the coolant system.
2 people handle the unit during assembly.
1.
Remove the screws on the back of the top cover.
ews at rear side of top cover.
38
er and thermostat knob, then place it aside.
DO938K
unscrew

Publicité

Table des Matières
loading

Table des Matières