JVC RX-D412B Manuel D'instructions page 15

Do not connect the AC power cord until all other connections have been made.
Turn off all components before making connections.
• When you connect the components, refer also to their manuals.
Connecting a DBS tuner:
Green
Blue
Red
NOTES
• Select the audio and video input setting according to the connection method. See page 21 for
details.
• When connecting a DBS tuner to the COMPONENT VIDEO jacks, select "DBS" for the COMPONENT
select setting (see page 34); otherwise, you cannot view the playback picture on the TV.
• You can enjoy digital sound if using a digital coaxial or optical cable. When shipped from the
factory, the digital optical terminal—DIGITAL IN 2(DBS) on the rear of the receiver is set for a DBS
tuner. For details of digital audio connection, see page 14.
Connecting a TV:
Connect the TV to the appropriate MONITOR OUT jacks to view the playback picture from any other connected video
components.
NOTES
• Select the audio input setting according to the connection method. See page 21 for
details.
• You can enjoy digital sound if using a digital coaxial or optical cable. For details of the
digital audio connection, see page 14.
• Select "OTHER" for the video output setting (see page 34).
Component video cable (not supplied)
White
Red
Green
Blue
Red
Stereo audio cable
White
(not supplied)
Red
S-video cable (not supplied)
Composite video cable (not supplied)
Stereo audio cable (not supplied)
Composite video cable
(not supplied)
S-video cable (not supplied)
Component video cable (not supplied)
Å To component video input
• Connect Y, P
ı To left/right audio channel output
Ç To S-video input
Î To composite video input
: signal flow
DBS tuner
Å To left/right audio channel
output
ı To component video output
• Connect Y, P , and P
B R
correctly.
Ç To composite video output
Î To S-video output
: signal flow
TV
, and P correctly.
B R
13