Information Display; Available Parameters - Voss.farming Xtreme Duo Rf Mode D'emploi

Available symbols:
Displays the power level selected (5 J limit/100%)
Displayed when the alarm is activated (see Section 8.6)
Displays the time delay before the power is increased
Displays the status when the battery is connected:
Displayed when 230V is connected
Error E1 (see Chapter 11)
8.3

INFORMATION DISPLAY

Available parameters:

Output voltage
Battery voltage
Power output
Grounding voltage
Available graphic displays of overgrowth on fence:
>1000 ohms – short fence with minimal overgrowth
52
INSTRUCTION MANUAL VOSS.FARMING XTREME DUO RF
Full battery/blue - violet LED – more than 12 V
Battery half-full/red LED
Empty battery/red LED + siren
The device switches itself off – less than 11.4 V
The Information shows the value of the selected
parameter on the right side. On the left side, the
fence resistance (numerical) and the vegetation on
the fence (graphical) are displayed.
You can choose between the parameters displayed
by pressing the Enter button. There are four options
available, which are repeated in rotation: Output
voltage [kV], battery voltage [V], power output [%]
and grounding voltage (kV).
– 12–11.6 V
– 11.6–11.4V
I n fo
The tolerance of the output voltage displayed
is ±10%.
MAC Address
41550 - 11.2024 - V04
R E S E T