TFK mono sport Notice D'utilisation page 13

position, pull the straps of the locking device and push the backrest
upwards.
Fig. 11:
Push the bumper bar from above onto the frame tubes. Secure it by
clamping the latches (16) on the left and right. By pressing the buttons (17)
you can move it into different positions. If you release the bumper bar from
the frame on one side by opening the latch (16), you can swing it to the
side and make it easier for your child to get in.
Insert the canopy into the holders (18) on the left and right side of the
frame. Finally, it should be attached to the backrest with the two snap
fasteners (a) and hook & loop bands (b) on the seat cover should be
attached with the two bands on the frame bars. If you open the
zipper (19), you can pull the canopy further forward. You will find the
integrated weather protection in the pocket at the back of the canopy.
Fig. 12:
Always secure your child with the 5-point harness. Close the belt buckle
(20) by audibly engaging the two plugs (21) in the belt buckle. To open it,
simply press the button in the middle of the buckle. The harnesses can be
adjusted to the size of your child using the tightening system and the
height lock. To make it easier to get in, you can attach the straps to the
loops (22) on the left and right.