EVOC COMMUTE A.I.R. PRO Manuel D'instructions page 10

EN
INITIAL USE
The following descriptions can
also be found in the form of
video instructions by scanning
the QR code opposite.
Charging the system and connecting the inflator
Before using the COMMUTE A.I.R. PRO for the first
time, charge the MINERVA AIRBAG SYSTEM fully.
To do this, open the backpack's main compartment
and also the airbag compartment within to access
the system's triggering unit (Fig. 5.1/ Fig. 5.2).
Remove the triggering unit's USB cover and charge
the system using the USB-C charging cable supplied.
The LED on the chest strap triggering buckle now
flashes red to indicate that charging is in progress.
This LED extinguishes as soon as the battery is fully
charged.
Always ensure that you regularly charge the system
to ensure it functions properly. Follow the more
detailed descriptions in the section "Activating and
deactivating the system".
Once the system is fully charged, unplug the cable
and close the USB socket (Fig. 3). You can now con-
nect the inflator (Fig. 5.3 a-c).
Before connecting, ensure that the top of the chest
strap triggering buckle is locked in its intended park
position on the right shoulder strap (Fig. 2.3).
10
Fig. 5.1
Fig. 5.2
Fig. 5.3