TECHCON TS350 Mode D'emploi page 8

8 MAINTENANCE
The dispenser is designed and built to be relatively maintenance free. To assure
trouble free operation, the following recommendations should be followed:
1. Make certain air supply is clean and dry
2. Avoid turning barrels upside down or laying barrel so that material may
run through air line to internal components
3. Avoid connecting the unit to excessive moisture or solvent saturation.
4. Avoid connecting air supply exceeding 100 psi (6.9 bar) for the TS350
and 15 psi (1.03 bar) for the TS355
5. Use only Amyl Alcohol to clean outside surface of the main housing.
6. Use only soft cloth to clean the LCD
PULL/PUSH FITTING CHANGE GUIDE.
NOTE: the wrench on the left is NOT allowed to move.
9 SPARE PARTS AND ACCESSORIES
For TS3xx/2xx spare parts and accessories information, please visit the TS3xx/2xx
User Guide webpage at http://www.techconsystems.com
10 LIMITED WARRANTY
8