Mafell MKS 185 Ec Traduction De La Notice D'emploi Originale page 19

2.3 Technical data
Operating voltage
Mains frequency
Input power continuous operation
Power consumption continuous operation
Speed during idling
Cutting depth
Maximum cutting depth 30°/45°/60°
Tilting saw unit
Saw blade diameter max/min
Saw blade body thickness
Tool cutting width
Saw blade mounting hole
Hose connector diameter
Weight without mains cable, with parallel guide fence
Dimensions (W x L x H)
2.4 Emissions
The declared noise emission values have been measured in accordance with EN 62841-1 and EN 62841-2-5
and may be used for comparing the tool with another and also in a preliminary assessment of exposure.
2.4.1 Noise emission specifications
Noise emission values determined according to EN 62841-1 and EN 62841-2-5:
Sound pressure level
Uncertainty
Sound power level
Uncertainty
The noise measurement was recorded using the saw blade included in the standard equipment.
2.4.2 Vibration specifications
The typical hand-arm vibration is less than 2.5 m/s
Danger
The noise emissions during actual use of the power tool can differ from the declared
values depending on the ways in which the tool is used especially what kind of
workpiece is processed.
Always wear hearing protection, even when the power tool ist running idle in addition
to the trigger time!
230 V AC
50 Hz
3000 W
15,9 A
1400 - 1800 rpm
105 - 185 mm (4 1/8 – 7 ¼ in.)
160/131/93 mm (6 5/16, 5 3/16, 3 11/16 in.)
up to 60°
450/413 mm (17 ¾, 16 ¼ in.)
2.5 mm (3/32 in.)
4.2 mm (11/64 in.)
30 mm
58 mm (2 9/32 in.)
15,3 kg (33.7 lbs)
460 x 720 x 496 mm (18 1/8 x 28 3/8 x 9 ½ in.)
L = 103 dB (A)
PA
K = 3,0 dB (A)
PA
L = 111 dB (A)
PA
K = 3,0 dB (A)
PA
.
2
-19-
120 V AC 240 V AC
60 Hz 60 Hz
23,5 A 15,9 A