Teac CR-H101 Mode D'emploi page 15

n
UPCONVERT button
Press this button to turn upconversion on and off.
o
DIMMER button
Press to change the display brightness.
p
Source buttons
Use these buttons to select the playback source.
q
MENU button
Press to enter setting mode.
r
Direction (k/j) buttons
When the playback source is CD, use to select folders.
(MP3/WMA only)
When the playback source is FM, use to change presets.
s
Direction (l/;) buttons
Search (m/,) buttons
When the playback source is CD, press during playback
to search backward/forward.
When the playback source is FM, use to lower/raise the
frequency received. Press and hold for at least two sec-
onds to begin automatically selecting stations.
t
MODE button
When the playback source is CD, use to switch
between repeat playback and shuffle playback.
When the playback source is FM, use to switch
between stereo and mono.
u
Stop (8) button
Press during playback to stop playback.
v
Play/pause (7/9) button
When the playback source is CD and the unit is
stopped or paused, press to start disc playback.
Use this button to pause playback during playback.
When the playback source is FM, use to select presets
and frequencies.
w
CLEAR button
Use to clear programmed tracks.
x
PROGRAM button
When the playback source is CD, use with program
playback.
When the playback source is FM, use with radio station
presets.
15