Switching The Water Filter Counter On And Off; Switching On Or Switching Off Condensation Protection; Theater Mode; Resetting To The Factory Settings - Thermador T30IB900SP Guide D'utilisation

en-us Operating the appliance
Switching on Pull-to-open system
In an installation situation with handles you can
select the Pull-to-open system. Your appliance will
support you in opening the door as soon as you pull
on the handle.
Open menu item Aut. door opening of
1.
refrigerator compartment or freezer compartment.
Select menu item Pull-to-open system.
2.
Press 8 button.
3.
Select menu item Opening force. Here you can
4.
select the level of force required to activate
automatic door opening.
Switching off automatic door opening
Open menu item Aut. door opening.
1.
Select menu item Off.
2.
Press 8 button.
3.
Switching the water filter counter on and
off
If you have replaced the water filter with a particle
filter, switch the water filter counter off. It is not
needed in this case as the particle filter does not
have to be replaced.
Press " button to open the Settings menu.
1.
Scroll to the left to the Appliance settings menu.
2.
Press 8 button.
3.
Press > button to move to the menu item Water
4.
filter counter.
To change the setting, press : button.
5.
Switching on or switching off
condensation protection
This function is only available with 3-door
appliances. 3-door appliances are equipped with a
door pillar with condensation protection.
You can open the left-hand door of the refrigerator
compartment without opening the right-hand door
beforehand.
9
CAUTION!
Never unfold the door pillar when the door is
open! It will get jammed when the door is
closed and be damaged or the front panels of
the right-hand door will be damaged.
A heater is built into the pillar to prevent
condensation. This can be switched on or off.
Press the " button to open the Settings menu.
1.
Use the < button to move to the menu item
2.
Appliance settings.
Press 8 button.
3.
Press the > button to move to the menu item
4.
Prevent condensation.
To change the setting, press the : button.
5.
18

Theater mode

If Theater mode is switched on, the light will slowly
become brighter when the appliance is opened, and
then slowly darker when it is closed.
Switching Theater mode on or off
Press " button to open the Settings menu.
1.
Press < button to move to the menu item
2.
Appliance settings.
Press 8 button to open the menu item.
3.
Use > button to move to the menu item Theater
4.
mode.
Press : button to open the menu item.
5.
Use > button to move to the menu item On or Off.
6.
Press 8 button.
7.
The setting is saved.
Press ; button to exit the menu.
8.

Resetting to the factory settings

Press " button to open the Settings menu.
1.
Press < button to move to the menu item
2.
Appliance settings.
Press 8 button.
3.
Use < button to move to the menu item Factory
4.
settings.
Press : button.
5.
A signal tone sounds, and a message to confirm
reset appears.
Press 8 button.
6.
All settings are reset to the factory settings.
Press ; button to exit the menu.
7.

Switching demo mode on or off

The cooling function of the appliance is switched off.
All other functions can be used.
Note: Do not store any food items in demo mode as
the appliance remains at room temperature.
Press " button to open the Settings menu.
1.
Press < button to move to the menu item
2.
Appliance settings.
Press 8 button.
3.
Use < button to move to the menu item Demo
4.
mode.
Press : button.
5.
Use <> buttons to select the setting On or Off
6.
Press 8 button.
7.
The setting is saved.
Press ; button to exit the menu.
8.