Operating The Appliance; Switching The Appliance On; Switching Off And Disconnecting The Appliance; Setting The Language - Thermador T30IB900SP Guide D'utilisation

en-us Operating the appliance

1Operating the appliance

S witching the appliance on
O p e r a t i n g t h e a p p l i a n c e
Press the main On/Off switch.
1.
The appliance starts cooling and the light is
switched on when the door is open.
Set the required temperature.
2.
~ "Setting the temperature" on page 14
Operating tips
When the appliance has been switched on, it may
■
take several hours until the set temperatures have
been reached. Do not put in any food until the
selected temperature has been reached.
The fully automatic NoFrost system ensures that
■
the freezer compartment remains free of ice.
Defrosting is not required.
The front sides of the housing are partly heated
■
slightly. This prevents condensation in the area
of the door seal.
If the freezer compartment door cannot be
■
immediately re-opened after it has been closed,
wait until the resulting low pressure has
equalized.
Switching off and disconnecting the
appliance
Switching off the appliance
Press the main On/Off switch.
■
The appliance is no longer cooling.
Disconnecting the appliance
9
CAUTION!
Deterioration in water quality
The water supply must be turned off 3 hours
before disconnecting. This prevents mold
forming with any unused water.
If you do not use the appliance for a prolonged
period:
Turn off the water supply to the appliance and
1.
wait 3 hours.
Remove groceries.
2.
Press the main On/Off switch.
3.
Pull out the mains plug or switch off the fuse.
4.
The appliance is no longer cooling.
Empty the ice cube container and clean the
5.
appliance.
~ "Cleaning" on page 22
Leave appliance open.
6.
14

Setting the language

Press " button to open the Settings menu.
1.
Press < button to move to the menu item
2.
Appliance settings.
Press 8 button.
3.
Press < button to move to the menu item
4.
Language.
Press : button.
5.
Use < > buttons to move to the required
6.
language.
Press 8 button.
7.
The display restarts, and the start screen is
displayed.

Setting the temperature unit

You can choose between the unit °C and °F.
1° <=> 1 °F
1 °C <=> 1 °C
Press " button to open the Settings menu.
1.
Press < button to move to the menu item
2.
Appliance settings.
Press 8 button.
3.
Use < button to move to the menu item
4.
Temperature unit.
Press : button.
5.
Use < > buttons to move to the required unit.
6.
Press 8 button.
7.
The unit will be changed.
Press ; button to exit the menu.
8.

Setting the temperature

Recommended temperature
Cooling compartment:
Freezer compartment:
Setting the refrigerator and freezer compartment
temperature
To open the menu for setting the temperature,
1.
press the " button.
Use the m button to select the desired
2.
compartment.
Keep pressing the ¼ button until the display
3.
indicates the required temperature.
Confirm the selection by pressing the 8 button. If
4.
the button is not pressed, the appliance stores
the setting and automatically returns to the main
screen after a few seconds.
+39 °F (+4 °C)
0 °F (–18 °C)