Complete Installation; Assistance - KitchenAid W11103357B Instructions D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

9. Install four 1" (2.5 cm) screws to secure the Microwave
Drawer in place, then close the drawer.

Complete Installation

1. Check the operation of Microwave Drawer by placing 1 cup
(250 mL) of water in the Microwave Drawer and programming
cook time of 1 minute at 100% power.
2. If the Microwave Drawer does not operate:
Check that a household fuse has blown, or a circuit
breaker tripped. Replace the fuse or reset the circuit
breaker. If the problem continues, call an electrician.
Check that the power supply cord is plugged into a
grounded 3 prong outlet.
See the Use and Care Guide for troubleshooting
information.
Installation is now complete.
Save these Installation Instructions for future use.

ASSISTANCE

Call your authorized dealer or service center. When you call,
you will need the microwave drawer model number and serial
number, both of which can be found on the model and serial
number plate.
If you need additional assistance, call us at our toll-free number
or visit our website listed in the Use and Care Guide.
To access the model and serial number plate, fully open the
microwave drawer. The plate is located on a flat surface just
beyond the back wall of the drawer.
7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Kmbd104gss

Table des Matières