General Maintenance - Ryobi One+ Psbhm02 Manuel D'utilisation

WARNING:
When servicing, use only identical replacement parts.
Use of any other part could create a hazard or cause
product damage.
LED LIGHT FUNCTIONS
TOOL STATUS
Normal
Low Battery
Excessive Force
Over Temperature
*More than 9 flashes will result in the need to remove the battery and reinsert a few minutes later.
ILLUSTRATIONS START ON PAGE 10 AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.
MAINTENANCE

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and can be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
TROUBLESHOOTING
LED LIGHT SCENARIO
Solid Light (No Flashes)
3 Flashes
6 Flashes
9 Flashes
9 – English
ACTION REQUIRED
No Action Needed
Replace Battery
Wait 5 Seconds
Let Tool Cool Off