Maintenance; Maintenance Schedule - BEAL NPMS15.5/107H Notice D'emploi

Maintenance Schedule

Frequency
Daily or before each use
After completion of first
5 hours
After 25 hours
Before storage of 30 days
or more
NOTE: Illustrations and pictorials begin on page 3.
Maintenance Required
Maintenance engine.
Examine blade(s).
Remove debris from unit and mowing area.
Examine all rotating and sliding parts.
Check tire inflation.
Verify that the mower housing is level.
Examine V-belts.
Check brake operation.
Change oil.
Maintenance engine.
Remove, examine, sharpen, and balance
blade(s).
Check adjustments:
a. Blade Rotation Control.
b. Brake.
c. Clutch.
d. Steering.
Lubricate chassis and mower housing.
Check the muffler:
a. Torque.
b. For wear or burn out.
c. Condition of spark arrestor
(if applicable).
Prepare engine for storage.
Drain fuel system.
Add fuel stabilizer.
Prepare battery for storage:
a. Remove from unit.
b. Fully charge.
c. Move to cool dry place.

Maintenance

Comments
Refer to the Engine Owner's Manual.
Check for cracks, wear, and excessive damage.
Refer to the Maintenance section.
Refer to the Maintenance section.
Check for cracks, wear, and excessive damage.
Refer to the Operation and Maintenance
sections.
Refer to the Engine Owner's Manual.
Refer to the Engine Owner's Manual.
Refer to Maintenance section.
Refer to Maintenance section.
Refer to Where to Lubricate instructions.
Refer to Maintenance section.
Refer to the Engine Owner's Manual.
Refer to warnings in the Owner's Manual.
Refer to the Engine Owner's Manual.
17