Features And Controls; Location Of Controls; Attachments - BEAL NPMS15.5/107H Notice D'emploi

NOTE: Illustrations and pictorials begin on page 3.
Location of Controls (Figure 5, Figure 20)
Blade Rotation Control (A) — Use the blade rota tion control
to start and stop the rotation of the blade.
Brake Pedal (B) — Use the brake pedal to quickly stop.
Headlight Switch (C) — The headlight switch is the first
part of the ignition switch. To use the lights with the engine
running, turn the key to the position for the lights.
Ignition Switch (C) — Use the ignition switch to start and
stop the engine.
Speed Control Pedal (D) — Use the speed con trol pedal to
change the speed and the direction of the unit.
Lift Lever (E) — Use the lift lever to change the height of
cut.
Parking Brake Lever (F) — Use the parking brake lever to
engage the brake when you leave the unit.
Throttle Control Lever (G) — Use the throttle control lever
to increase or decrease the speed of the engine.
(Figure 20) Automatic Drive Disconnect (A) — Use the
automatic drive disconnect to disengage the transmission.

Features and Controls

Attachments

This unit can use many different attachments. This unit
can pull attachments like a lawn sweeper, a lawn aerator,
or a hopper spreader. This unit can not use attachments
that engage the ground like a plough, a disk harrow, or a
cultivator.
For trailer and pull-behind attachments, the maximum weight
is 113 kg (250 lbs.).
13