Preventive And Corrective Maintenance; Lubrication; Cleaning The Bottom Stapler; Removing Jammed Staples - Josef Kihlberg B560M Mode D'emploi

Josef Kihlberg B561M
7

7.1 LUBRICATION

The linkage bearings are greased at delivery.
At regular intervals (monthly) lubricate them with oil.
Also lubricate the moving parts in the stapling head
with a few drops of oil.

7.2 CLEANING THE BOTTOM STAPLER

This bottom stapler does not require special servicing.
It only needs regular cleaning with a non-aggressive
(non-corrosive) cleaning agent. Do not remove any
parts for cleaning purposes!
– Check if all screws and nuts are securely tighten-
ed.

7.3 REMOVING JAMMED STAPLES

– Pull the pusher back to take the pressure off the
staple strip.
– Slightly loosen the five screws (Fig. 11/1 and 11/2)
that hold the front plate one turn.
– Remove the jammed staple downwards.
– Retighten the five screws.
10

PREVENTIVE AND CORRECTIVE MAINTENANCE

1
1
Fig. 11
1
2
1
06.14