System Example - Alpine DVA-9965 Mode D'emploi

System Example

Connect the External Monitor
The following example shows a system connection using the S-Video output to a front monitor with S-Video input and a touch panel compatible
rear monitor.
REMOTE IN
1 Monitor Control Lead (Rear) (White/Pink)
Connect this to the Monitor Control Lead of the touch panel
compatible rear monitor.
2 Remote Control Input Lead (Rear) (White/Brown)
Connect this to the remote control output lead for the rear
monitor (Alpine's).
Connect the Ai-NET compatible audio processor (Fiber digital compatible) and changer
Please observe the following when using Fiber Optic Cable.
• Do not coil the Fiber Optic Cable smaller than a 30 mm radius.
• Do not place anything on top of the Fiber Optic Cable.
• Be careful not to bend the Fiber Optic Cable at a sharp angle.
70
-EN
(Rear)
M.CONT
(White/Pink)
(Rear)
(White/Brown)
4
5
1
Fiber optic cable
4
1
M.CONT
(White/Pink)
2
REMOTE OUT
(White/Brown)
6
7
3
3 S video cable (Included)
4 Video Output connectors (Yellow)
5 Audio Output connectors
6 RCA Extension Cable (Included)
7 RCA Extension Cable (Sold separately)
Audio processor (Ai-NET)
(Fiber digital compatible)
(sold separately)
3 3
Ai-NET cable
CD changer (Ai-NET)
(sold separately)
1 Fiber optic Cable (Sold Separately)
2 Ai-NET Cable (Included with CD Changer)
3 Ai-NET Connector
Connect this to the output or input connector of other
product equipped with Ai-NET.
4 Ai-NET Cable (Included with Audio Processor)
To Video Input
terminal
Touch panel
compatible monitor
(sold separately)
To Audio Input
terminal
Monitor with S
terminal
(sold separately)
Fiber digital Input terminal
(for head unit)
Fiber digital Input terminal
(for changer)
*
Fiber optic cable
Ai-NET
2
cable
1
* Only connect fiber digital
compatible CD changer