Work Area; Personal Safety; Personal Protective Equipment - Pro-Point 8656316 Manuel D'utilisation

V1.0
CAUTION!
NOTICE!

WORK AREA

1. Operate in a safe work environment. Keep your work area
clean, well lit and free of distractions.
2. Keep anyone not wearing the appropriate safety equipment
away from the work area.
3. Store tools properly in a safe and dry location. Keep tools out
of the reach of children.

PERSONAL SAFETY

WARNING! Wear personal protective equipment approved by
the Canadian Standards Association (CSA) or American
National Standards Institute (ANSI).

PERSONAL PROTECTIVE EQUIPMENT

1. Always wear impact safety goggles that provide front and
side protection for the eyes. Eye protection equipment
should comply with CSA Z94.3-07 or ANSI Z87.1 standards
based on the type of work performed.
2. Wear the appropriate type of full-face shield in addition to
safety googles, as the work can create chips, abrasive or
particulate matter.
3. Wear gloves that provide protection based on the work
materials or to reduce the effects of tool vibration.
3.1 Do not wear gloves when operating a tool that can snag
the material and pull the hand into the tool.
4. Wear protective clothing designed for the work environment
and tool.
5. Non-skid footwear is recommended to maintain footing and
balance in the work environment.
Visit www.princessauto.com for more information
20 TON HYDRAULIC SHOP PRESS
This notice indicates a potentially hazardous
situation that may result in minor or moderate injury
if proper practices are not taken.
This notice indicates that a specific hazard or unsafe
practice will result in equipment or property
damage, but not personal injury.
8656316
3