3. Siting
3.1. Position the Sentinel Multivent, taking into consideration
the position of the rooms to be ventilated, the exhaust position
and the electrical services. Ensure there is adequate access
for installation and maintenance. Securely mount the Sentinel
Multivent through the mounting holes on the casing using the
appropriate anti-vibration mounts or acoustic mat, screws,
washers, rubber bushes etc.
3.2. The Sentinel Multivent may be mounted in either of
three orientations.
4. Installation
3.2.1. Base mounted
Installation with ducting
radiating out horizontally.
3.2.2. Vertically mounted installation with the exhaust spigot at top. The electrical
connections must come out of the bottom of the unit in order to maintain the water
ingress protection.
3.2.3. Ceiling mounted
installation. Ducting
radiates out horizontally.
A typical installation
4