Publicité
UP
UP
DN
DN
EMU01312
PROCEDURE FOR TILTING UP
Power tilt model
1) Remove the fuel-line connection from
the motor.
304045
2) Push the power tilt switch "UP" until
the outboard has tilted up completely.
701034
3) Push the tilt support knob into the
clamp bracket to support the engine.
w
After tilting the engine, be sure to sup-
port it with the tilt support knob. Other-
wise, the engine could fall back down
suddenly if oil in the power tilt unit
should lose pressure.
000603
EMU01313
PROCEDURE FOR TILTING DOWN
Power tilt model
1) Push the power tilt switch "UP" until
the engine is supported by the tilt rod.
2) Pull out the tilt support knob.
3) Push the power tilt switch "DN"
(Down) to lower the engine to the
desired position.
3-26
GB
Publicité
Chapitres
